DG-P9E5/N New
Device type: DG/P Description of device type
Detectors DG/P are used for continuous monitoring of premises for combustible and toxic gases. The detector performs cyclic measurement of gas concentration in the air and transmits the measured value in 4-20mA standard (passive output).
DG/P detectors are designed to work with:
- measuring and threshold control units of type MDP-1.A/T, MDP-1 PLUS, MDP-4, MDP-8, MDP-16;
- addressable control units of type MDD-1, MDD-1/T, MDD-1x/T;
- with any other control panels accepting the 4-20mA input line standard (with current emission).
For use with control units from other manufacturers, GAZEX recommends to use detectors type DG/PV with dual outputs (active 4-20mA and 2-10V).
Features
- 4-20mA standard analog output (passive);
- easily exchangeable sensor unit and easy maintenance;
- easy change of the detected gas or calibration of the detector;
- built-in temperature compensation;
- infra-red sensor for combustible gases or electrochemical sensor for toxic gases or oxygen;
- sensor unit with “zero” and “span” regulation (calibration outside the detector);
- low-cost operation;
- all detectors are calibrated in our own GAZEX Calibration Laboratory operating in accordance with PN-EN ISO/IEC 17025 (PCA accreditation No AP150).
Typical system configuration
Device model: DG-P9E5/N
Technical parameters
- Output in 4-20mA standard
- Visual signalling, built-in
- Supply voltage
- System powered
- Dimensions
- —
- EAN Code
- 5901769658660
- Net price
- PLN1,149.00 N
| Gas sensor module | Sensor | Substance/property | Standard alarm thresholds or measuring range | |
|---|---|---|---|---|
| MS-P9E5/N | Electrochemical |
Oxygen (O2) |
0 ÷ 25 |
%v/v |
Documentation
| Series | Technical data | Device information sheet | User Manual | Declaration of conformity |
|---|---|---|---|---|
| W1 | Download file | — | — | — |
| Archived series | ||||
| U4 | — | — | — | — |
Suggested products
Splash-proof enclosures AP-1
Splash-proof enclosures to protect detectors from adverse weather conditions and mechanical damage
Tubular shields AR-1
Profiled tube guards to protect the detector from direct mechanical damage
DG/w
Adaptation of DG/F, DG/M, DG/P or DG/PV detectors for installation into a ventilation duct
Gas test sets GTS
Test sets for verifying the correct operation of detectors by injecting a gaseous test mixture into the measuring chamber of the detector