DG-0E.ALC/MR

Digital DG/MR detectors are designed for continuous monitoring of gases in enclosed spaces. When preset concentration values are exceeded, the detector’s optical alarm signaling is activated, built-in relays change their state and information is transmitted to a digital control module using a RS-485 network. The detectors are designed for work in the Digital Gas Detection System.

The detectors have an exchangeable module with a semiconductor, electrochemical, or optical sensor (Infra-Red). The interchangeability of the gas sensor modules facilitates maintenance, simplifies calibration and reduces operating costs.

The DG/MR detectors cannot be used in areas classified as explosive atmospheres of gases, vapours or dust.

Area of application

• industrial plants, logistics centres, public facilities;
• extensive rooms at risk of toxic or explosive gas emissions with locally controlled sirens.

Features

• communication, control and transmission of information through the port in RS-485 standard, with MODBUS RTU protocol;
• two alarm thresholds or measurement mode (for electrochemical sensors and Infra-Red);
• two built-in relays with NO/NC contact, on a removable board (for A1 and A2 status);
• sensor in replaceable intelligent module (replaceable with DG/F and DG/P);
• sensor can be selected for the application;
• short detector response time;
• built-in control microprocessor means reliable and stable operation;
• thermal compensation system;
• history of alarm states;
• semi-automatic addressing in digital network (without opening the housing);
• screwless terminals, removable, with possibility of connecting two FTP wires;
• selective LED optical optimization;
• two cable entries – easy connection of successive detectors (loop-through);
• optionally, the possibility of being equipped with an additional casing made of steel pipes (AR-1d) or a casing for ventilation ducts (DG/w version);
• configuration of detector settings via dedicated configuration software „DETnet View”, available at https://www.gazex.pl/oprogramowanie/;
• all detectors are calibrated in our own GAZEX Calibration Laboratory operating in accordance with PN-EN ISO/IEC 17025 (PCA accreditation no. AP150).

Block diagram